For new Smartport Drive/FDD emulator

Due to some reasons, I've planned to develop faster Newer Smart Drive for APPLE II system.

The AVR(Atmega128) isn't fast compare to these days MPU and lack of memory.

Even AtXmega series are only 32Mhz.

For better performance for Smartport Drive and more function for DISK][,

I'm going to new design for new Smartport Drive and FDD emulator.

I have lots of choice but, I want to use one of not well known MPU.

It is Korean made one and good features has.

It is what I want to use.

Parameters	Values
EISC Core	32bit AE32000
F. Max (MHz)	96
MIPS	96
Vcc (V)	3.3
Packages	Pb-Free
	100 TQFP
Flash (Kbytes)	128/512
SRAM (Kbytes)	80
NAND Flash Controller	8bit I/O
	1/4bit ECC
SRAM Interface	8/16 bit
ISP	Yes
JTAG	Yes
PLL	Yes
GPIO	53
KEYSCAN	4 X 4
External Interrupt	2
DMA	2
TIMER	32bit x 8
SD Card Controller	Yes
SPI	1
TWI	1
UART	8
I2S	1
Voice Codec	Yes
ADC	Voice codec 14bit x 4
DAC	Voice codec 14bit x 1
RTC	Yes
Watchdog Timer	32bit
USB	2.0 Full (12Mbps) Device
	Control/Bulk/Interrupt

It has 96Mhz speed and 80KB SRAM space.

And more USB and even RTC(Real time clock) there.

It has dedicate SD card controller so, it handle SD memory card with superb speed.

And this processor isn't exactly ARM processor but as followed the maker engineer, It based on the ARM technologies.

I've tested SD card Reading speed, It has more than 2MB/S.

I will update what I'm going to do.

This time. I can show testing board.